DSP Feedback Loops
Sitting at the core (or left of center, depending on how you look at it) of the Z5000 VCDSP is the Tiptop Audio 24-Bit DSP. What makes it even more unique is that because the modular format allows patching to and from anywhere in a system it is fairly easy to make very interesting use of the 16 different algorithms that the DSP contains.
All of the algorithms in the DSP work differently. Some handle the signal on two separate channels (like the delay effects), but the reverb algorithms, work entirely differently, mixing and processing the signal together using both processors.
Using that delightful feature, it is possible to send a signal into the left input and then feed the left output back to the module's right input that to create a wild feedback loop that makes the module to oscillate and create its own sounds and timbres, similar to the way filter resonance works. This oscillation will continue as long as the CTRL knob is set to MAX, and will decay as the knob is turned to MIN.
Technically, the module should start oscillating even with out any external signal. Using a sound source, however, gives you the ability to "trigger" and control the oscillation and also blends the oscillation timbre with that of the incoming sound source.
Check out the sample below for those long oscillations fading in and out as the sound source triggers them. It's nice to hear how the sound source is changes the tone of this oscillation each time it cycles.
http://www.tiptopaudio.com/dl/Z5000_5.mp3
